[Gammaray-interest] Since 2.0, GammaRay doen't work at all

[Volker Krause]

I've tested your combination (Qt 4.8 MSVC 2010 debug 32bit) here now, both 
with and without deployment it works fine on a simple test target. I assume 
you are testing with your "real" application as the target? Could you maybe 
check what happens with e.g. "messagemodeltest.exe" that you'll find in the 
"bin" folder of the GammaRay build directory? That should tell us if we are 
looking at a fundamental problem with GammaRay, or some specific 
incompatibility to your target.

regards,
Volker

On Thursday 27 March 2014 16:20:36 Schimkowitsch Robert wrote:
> There seem to be two separate issues:
> 
> 1) The first issue seems to be about deployment.
> 
> I am building on "d:\sources\Qt\GammaRay-2.0.1\build\", and deploying to
> "c:\Program Files (x86)\GammaRay\" I can start gammaray without options,
> and the launcher does show when running from
> "d:\sources\Qt\GammaRay-2.0.1\build\bin\" However, the launcher will not
> show when running from "c:\Program Files (x86)\GammaRay\bin\"
> 
> This one is easy enough for me to circumvent.
> 
> Files in my target bin folder (drive C):
> gammaray_common-qt4.8-MSVC-debug-i686.dll
> gammaray_core-qt4.8-MSVC-debug-i686.dll
> gammaray_ui-qt4.8-MSVC-debug-i686.dll
> gammaray.exe
> gammaray-client.exe
> gammaray-launcher.exe
> 
> Note: I have run nmake install with Admin rights.
> 
> 2) GammaRay will still not attach to my process
> With In-Process, nothing happens at all.
> With Out-Of-Process, an empty command line window appears, but nothing else
> happens. I have tried running my application both with and without debugger
> attached.
> 
> 
> Kind regards
> 
> Robert Schimkowitsch
> Automation
> Development Control Center Systems
> ANDRITZ HYDRO GmbH
> Eibesbrunnergasse 20
> 1120 Vienna, Austria
> Phone: +43 50805 56767
> e-mail: robert.schimkowitsch at andritz.com
> Internet: www.andritz-hydro.com
> 
> 
> -----Original Message-----
> From: Volker Krause [mailto:volker.krause at kdab.com]
> Sent: Donnerstag, 27. März 2014 16:45
> To: gammaray-interest at kdab.com
> Cc: Schimkowitsch Robert
> Subject: Re: [Gammaray-interest] Since 2.0, GammaRay doen't work at all
> 
> On Tuesday 25 March 2014 07:14:13 Schimkowitsch Robert wrote:
> > I don't know where to report this, but since Version 2.0, GammaRay has
> > stopped working completely. I have tried both 2.0 and 2.0.1
> > 
> > Contrary to the command line output, starting GammaRay without command
> > line
> > parameters does nothing except show the help output. Starting
> > GammarayLauncher, you can select a process to attach to. The most that
> > happens is that an empty command line window opens, nothing more. Same
> > thing when you attach to a process via the command line. I've tried all
> > three attaching options (in-process, out-of-process with local or remote
> > debugging). With out-of-process, I get the empty command line, with
> > in-process I get nothing at all.
> 
> This sounds like it's not finding the helper executables (gammaray-
> launcher.exe, gammaray-client.exe). I assume you are calling gammaray.exe in
> the bin folder of the build directory? The other executables should be
> right next to it. If they are, could you post the content of
> config-gammaray.h (one level above "bin"), especially the
> GAMMARAY_INVERSE_xxx_DIR #defines. If they got messed up, it would explain
> this behavior.
> 
> regards,
> Volker
> 
> > Configuration:
> > Windows 7x64
> > VS 2010 SP 1
> > Qt 4.8.1
> > cmake 2.8.12.2
> > No additional GammaRay plugins, just what the branch zipfile from Git
> > contains.
> > 
> > I've built GammaRay with exactly that configuration, and I am using it on
> > applications built with the very same configuration.
> > 
> > GammaRay 1.3 is working....sort of.
> > 
> > Kind regards
> > 
> > Robert Schimkowitsch
> > ________________________________
> > 
> > This message and any attachments are solely for the use of the intended
> > recipients. They may contain privileged and/or confidential information or
> > other information protected from disclosure. If you are not an intended
> > recipient, you are hereby notified that you received this email in error
> > and that any review, dissemination, distribution or copying of this email
> > and any attachment is strictly prohibited. If you have received this email
> > in error, please contact the sender and delete the message and any
> > attachment from your system.
> > 
> > Thank You.
> > 
> > ________________________________

-- 
Volker Krause | volker.krause at kdab.com | Senior Software Engineer
KDAB (Deutschland) GmbH&Co KG, a KDAB Group company
Tel. Germany +49-30-521325470, Sweden (HQ) +46-563-540090
KDAB - Qt Experts - Platform-independent software solutions
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4840 bytes
Desc: not available
URL: <http://mail.kdab.com/pipermail/gammaray-interest/attachments/20140328/9076b641/attachment.bin>